Section 1.0: Basic Configuration (10 points)

1.1. IP Addressing (2 points)

  1. Redraw a detailed topology with all the necessary information.

  2. Configure IP addressing as per the topology diagram in Figure 2-1.

  3. Do not configure any static or default routes anywhere on the network unless otherwise specified. Configure a default route on R8 to null0. R8 is the perimeter router in this network. Populate this default route to all the routers.

  4. Create the following loopbacks:

    Loopback-1 11.11.11.11/24 on R1

    Loopback-1 12.12.12.12/24 on R2

    Loopback-1 13.13.13.13/24 on R3

    Loopback-2 13.14.13.13/24 on R3

    Loopback-1 14.14.14.14/24 on R4

    Loopback-2 144.144.144.144/24 on R4

    Loopback-1 15.15.15.15/24 on R5

    Loopback-1 16.16.16.16/24 on R6

    Loopback-1 17.17.17.17/24 on R7

    Loopback-1 ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial