Section 4.0: PIX Configuration

4.1. Basic PIX Configuration

  1. Configure basic parameters to bootstrap PIX.

  2. Make sure you can ping R5, R6, R7, Loopback1 on R7 and AAA server.

  3. Configure RIPv2 with clear text authentication on both interfaces e0 and e1. See Example 2-7.

  4. Configure PIX to advertise the default route to R7 via RIP. See Example 2-7.

    Tip

    This gets overwritten by eBGP from R5; refer to Section 2.4.1.

  5. Configure an access list for the outside interface to allow necessary traffic as required for the whole lab. See Example 2-7 in the next section.

4.2. Network Address Translation (NAT)

  1. Configure static NAT for AAA server, Switch1 Management interface, and Loopback1 of R7. See Example 2-7.

  2. Configure NAT/GLOBAL for any internal network to go to the ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial