Section 1.0: Basic Configuration (10 points)

1.1. IP Addressing (2 points)

  1. Redraw a detailed topology with all necessary information.

  2. Configure IP addressing as per the diagram.

  3. Do not configure any static or default routes anywhere on the network unless otherwise specified. Configure a default route on R2. Your routing table should have an entry as follows: “Gateway of last resort is 0.0.0.0.” Populate this default route to all the routers.

  4. Create the following loopbacks:

    Loopback-1 11.11.11.11/24 on R1

    Loopback-2 111.111.111.111/24 on R1

    Loopback-1 12.12.12.12/24 on R2

    Loopback-2 122.122.122.122/24 on R2

    Loopback-1 13.13.13.13/24 on R3

    Loopback-2 133.133.133.133/24 on R3

    Loopback-3 192.168.3.1/24 on R3

    Loopback-1 14.14.14.14/24 on R4

    Loopback-2 144.144.144.144/24 ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial