Section 2: IP IGP Protocols (30 Points)
Section 2.1 OSPF (10 Points)
Configure OSPF according to Figure 6-10. R1-s0/1, R2-s0/1, R4-s0/1, and R5-s0/1 are to be part of the OSPF area 0.
R2-s0/0 and R3-s0/0 are to be configured as OSPF area 1.
R1-e0/0 and Sw1-interface VLAN_11 are to be configured as OSPF area 11.
R1-e0/1 and R5 fa0/1 are to be configured as OSPF area 25.
If you configured this correctly as shown in Example 6-21 through Example 6-26, you have scored 4 points.
Configure the loopback addresses to be part of the OSPF process. These interfaces should appear in the OSPF routing table with their original /24 mask.
If you configured this correctly as shown in Example 6-22 through Example 6-27, you have scored 2 points.
Make sure you are able ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
