Section 2: IP IGP Protocols (30 Points)
Configure the IP routing as illustrated in Figure 5-10, following the directions.
Figure 5-10. IP IGP Diagram
Section 2.1: OSPF (10 Points)
Configure OSPF according to Figure 5-10. R1-s0/1, R2-s0/1, R4-s0/1, and R5-s0/1 are to be part of the OSPF area 0.
R2-s0/0 and R3-S0/0 are to be configured as OSPF area 1.
R1-e0/0 is to be configured as OSPF area 11.
R1-e0/1 and R5 fa0/1 are to be configured as OSPF area 25.
Configure the loopback addresses to be part of the OSPF process.
Make sure you are able to ping any OSPF interface from any router.
Section 2.2: EIGRP (8 Points)
Configure EIGRP between R2 and the BB1. ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
