Section 6: DLSw (4 Points)
The network manager deems the Frame Relay service to be susceptible to packet loss and requires that only TCP is used for DLSw+ features such as address resolutionpackets and unnumbered information frames. With this in mind, configure DLSw between VLAN3 and VLAN2. Peer from R4-R1 and R4-R6. Use the most appropriate encapsulation and peering method.
You should obviously use TCP as your encapsulation type here but the question gives you additional information about the address resolution packets and unnumbered information frames. From this additional information, you should research these features and find that these are in fact transmitted by default in UDP to avoid congestion if errors are encountered. To ensure these ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
