CCIE Routing and Switching Practice Labs

Equipment List

You will need the following hardware and software components to commence Lab 2.

• Eight routers are required loaded with Cisco IOS Software Release 12.2-16 Enterprise image and the minimum interface configuration as documented in Table 2-1. Routers R1 and R4 must be either 1700, 2600, 3600, or 3700 variants to complete the voice section in this lab.

  Table 2-1. Interfaces Required per Router

  Router	Ethernet Interface	Serial Interface	BRI Interface	Voice	ATM Interface
  R1	1	2	1	1 X FXS	-
  R2	1	1	-	-	-
  R3	1	-	-	-	-
  R4	1	1	1	1 X FXS	-
  R5	1	3	-	-	1
  R6	2	1	-	-	1
  R7	1	-	-	-	-
  R8	1	-	-	-	-

  NOTE

  Lab 2 was produced with Routers R1, R2, R3, R4, R7, and R8 using 2600s and R5 and R6 using 7200s.

• One Switch 3550 with Cisco IOS Software Release 12.1(12c) enterprise: c3550-i5q3l2-mz.121-12c.EA1.bin