Section 1: Bridging and Switching (15 Points)
Section 1.1: Frame Relay Configuration (6 points)
Configure the Frame Relay portion of the network as shown in Figure 1-11; ensure that DLCIs 110 and 104 between R1-R6 are not used.
Figure 1-11. Frame Relay Diagram
The routers are to be on the same subnet and should be configured with subinterfaces.
Section 1.2: 3550 LAN Switch Configuration (6 Points)
Configure VLAN numbers, VLAN names, and port assignment as per the topology diagram as shown in Figure 1-10.
There is to be a host connected on interface 0/16 in the future; the network administrator requires that this host is authenticated by a radius ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
