Section 6: DLSw+ (4 Points)
Configure DLSw+ between VLAN2 and VLAN4; use routers R8 and R5. Peer from Lo0 on R8 and the VLAN4 interface on R5; ensure that R8 can accept DLSw+ connections from only unknown TCP peers.
Peer as requested from Lo0 on R8 and configure this peer as promiscuous with TCP for the future connections. Configure R5 as requested and configure your bridging parameters to ensure the required connectivity. You should be concerned about this question; it is too easy and this should be ringing alarm bells. If you have configured this correctly as in Example 1-53 and Example 1-54, you have scored 2 points.
Example 1-53. R5 Iinitial DLSw+ Configuration and show output
dlsw local-peer peer-id 10.50.50.1 dlsw remote-peer 0 tcp 10.8.8.8 ... |
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
