As you learned in the preceding section, you can accomplish conditional control of the redistribution of routes between routing domains by using route maps. Due to the wide range of routing protocols that you can choose from, some of the match and set commands that you use with your route maps are specific to a particular protocol.
Use the following command to define a route map for redistribution:
R2(config)#route-map map-tag [permit | deny] [sequence-number]
Once you have the route map defined, you have the option of defining one or more match commands and one or more set commands to control traffic. If you do not define a match command, then everything matches. If you do not define a set ...