Configuring EIGRP
Before we discuss the functionality of EIGRP in more detail, you need to complete Lesson 9-1, in which you configure a simple EIGRP topology between R1 and R10 on an Ethernet network.
Lesson 9-1: Configuring Simple EIGRP
To see EIGRP routes in the routing table, you will configure two loopback interfaces on each router. You will then configure each router to advertise these routes to its neighbor in the same autonomous system. Figure 9-1 shows the network topology and IP addressing you will use in this lesson.
Figure 9-1. Simple EIGRP Topology
To configure simple EIGRP, follow these steps first on R1 and then on R10:
Step 1. ... |
Get CCIE Practical Studies: Security (CCIE Self-Study) now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
