In this mode, the Timmyton will play a simple dance tune while moving back and forth and flashing the brick LED in a multicolor pattern. Navigate to the switch tab with the bottom brick button highlighted. Then, set up this mode with the usual two display blocks, plus a wait with the duration set to 1 second, a medium motor block (port A, On, 100 percent power), and Mode Loop:
The programming for the dancing, music, and lights goes inside of Mode Loop. Fairly straightforward, right? Here is the program that gets the Timmyton to play and dance along to a simple waltz tune:
Yikes! The program itself is not too difficult, but because ...