The assembly of the drone frame requires a lot of patience and you are once again advised to follow the instruction manual when doing it for the first time. For reference, in this book, we will assemble a drone frame from HobbyKing (S500). Inside the box, you will get the items displayed in the following picture:
These items are listed here:
- Four frame arms (two blue and two black, if you buy the blue color)
- Four leg plates
- Two rods for the base mount
- One top plate
- One bottom plate for mounting the power lines
- And a lot of screws
Firstly, see the following figure and connect the parts as shown here:
Use a proper screwdriver ...
