Chapter Review Questions

The following questions test your knowledge of topics explained in this chapter. You can find the answers to the questions in Appendix A, “Answers to Chapter Review Questions.”

1.If a client picked up a customer service handset and was automatically connected to customer service without dialing any digits, what kind of call would it be?

  1. Cisco CallManager-to-Cisco CallManager call

  2. PBX-to-PBX call

  3. on-net call

  4. local call

  5. PLAR call

2.Which configuration parameter would you change to set the dial tone, busy tone, and ringback tone on an FXS port?

  1. cptone

  2. ring frequency

  3. ring cadence

  4. description

  5. signal

3.What are the two options for the linecode command on an E1 connection?

  1. SF

  2. ESF

  3. CRC4

  4. AMI

  5. B8ZS

  6. HDB3

4.What are the two options for the framing ...

Get Authorized Self-Study Guide Cisco Voice over IP (CVoice) now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial