Analog Electronics with LabVIEW®

PC.8. DC Circuit Setup

Components NPN RBp ≈ RBn. If slightly different, use RBp > RBn. Design IC = 1mA. Procedure SetVCE2.vi ramps VBB downward from the maximum,VBB(init) = VCC(init). Thus, initially, the npn will be in saturation and VCE will be very approximately 100 mV. The first check is for one point, maximum VBB = VCC = 10 V. The initial goal is verify that the npn is in saturation and that the current is greater than 1 mA for VCC = 10 V. Connect Circuit C5. Note that the bottom of RBp is now ground and Chan1_out moves to the bottom ...