Analog Electronics with LabVIEW®

P4.2. NMOS Transistor

Use CD4007 pins 3 (gate), 4 (source) and 5 (drain). Connect pin 4 (source) to pin 7 (body). Connect PMOS body (pin 14) to the most positive node in the NMOS measurements, Chan0_out or ground, depending on the circuit. In the γ_n measurement (NMOSgamma.vi) and the transfer characteristic measurement (NMOS_Cir.vi), pin 14 is connected to ground. Note that the NMOS of pins 6, 7, and 8 has internally connected body and source. This transistor is used in a following project.