P3.3. PMOS Transistor
Use pins 6 (gate), 14 (source), and 13 (drain). Connect the NMOS body (pin 7) to the most negative node, Chan1_out, for PMOSparam.vi. Leave pin 7 disconnected when running PMOSoutput.vi. Note that the source and body for this transistor are internally connected. Note that Chan0_in is used for positive voltages only. Thus, it is always set automatically for the unipolar mode, which slightly improves the resolution. Chan1_in must measure positive and negative voltages.
Get Analog Electronics with LabVIEW® now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
