Analog Electronics with LabVIEW®

P1.4. Resistor Voltage Divider with a Sine-Wave Source Voltage

Procedure The VI sends out, on Chan0_out, a sine-wave superimposed on the dc value. Add the connection, Chan1_in, directly to the output channel. Run the VI for various values of Chan0_out. Note that the maximum allowed Chan0_out is about 6 V since the dc and ac peak must be less than 10 V. Verify that the results are consistent. For example, the peak ac values must be 1.5 of the dc values since Vs = VDD/2. Default and save the Front Panel using Chan0_out = 4V.